DC-1295-C Class 100 Cleanroom Pink Or Clear Anti-Static ESD Bags ISO Class 5 - MIl B 22019C - JPG-5322-1 Level 100 - 4Mil, 6Mil

  DegageCorps. Anti-Static pink or clear non corrosive low density Class 100 - ISO class 5 ESD bags are extruded using virgin resin without any release agents or slip agents and have a non-corrosive additive bonded to the resin molecules that enable our film to impart corrosion resistance to any metal parts packaged within its environment.  Our Anti-Static ESD non corrosive bags are blended with a permanent Anti-Stat that will not leach to the surface and will meet MIL Spec B 22019C as well as maintain a cleanliness level that exceeds the specification of JPG 5322-1 Level 100 and ISO 14644-1 Class 5.

What Is MIL-PRF-22019E?    What Is JPG 5322.1G?    What Is JPG 14644?    BPA Free Guarantee    BSE TSE Animal Component Free Guarantee    Latex Free Guarantee

Available in the following configurations: Cleanroom Anti-Static Poly Bags - Cleanroom Anti-Static Zip Lock Poly Bags - Cleanroom Anti-Static Poly Tubing - Cleanroom Anti-Static Gusseted Poly Bags - Cleanroom Anti-Static Poly Sheets - Cleanroom Anti-Static Poly Pouches - Cleanroom Tote Covers - Cleanroom Pallet Covers - Cleanroom Anti-Static Square Bottom Bags - Cleanroom ESD Packaging

Note: All values given are based on a 1.25mil thick film.

MATERIAL SAFETY DATA SHEET

DegageCorp - CLEAR POLY BAGS, TUBING AND FILM.  Composition/Information on Ingredients

HAZARDS IDENTIFICATION:

EMERGENCY OVERVIEW: A clear or colored plastic film. Not considered hazardous under normal usage. Can release irritating and/or toxic vapors if involved in a fire.

POTENTIAL HEALTH HAZARDS:

SKIN: Contact with molten material will cause thermal burns.
EYES: Vapors, Fumes or Sprays which can form at elevated temperature can be an irritant.
INHALATION: Not hazardous at ambient temperatures: Vapors, Fumes or sprays which can form at elevated temperatures are irritants to the eyes and respiratory tract. 
INGESTION: NOT a route of exposure. An adverse reaction is not expected.
DELAYED EFFECTS: None known
ENGINEERING CONTROLS: General room ventilation plus local exhaust at points of fume generation to maintain exposure below the PEL/TLV exposure limits.

PERSONAL PROTECTIVE EQUIPMENT:
SKIN PROTECTION: Not normally required. Use heat resistant gloves if handling melted material.
EYE PROTECTION: As a general practice in manufacturing areas, safety glasses that conform to ANSI Z87.1 should' be worn.
RESPIRATORY PROTECTION: Under normal usage, not normally required. A NIOSH/MSHA approved respirator should be worn in areas where the PEL/TLV is exceeded.

EXPOSURE GUIDELINES: 

Occupational Exposure: Nuisance dust TLV: 10mg/m³ (ACGIH)

Ventilation: Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions.

Respiratory Protection: If engineering controls do not maintain airborne concentrations to an acceptable level, an approved respirator must be worn. In the United States of America, if respirators are used, a program should be instituted to assure compliance with OSHA standards 29 CFR 1910.134. Respirator type: Dust Organic Vapor.

Eye Protection: Wear Goggles or a face Shield when working with molten materials.

Skin Protection: Wear thermally resistant gloves and long sleeves when handling a molten product.

Recommended Decontamination Facilities:  Eye Bath, Washing Facilities 

PHYSICAL AND CHEMICAL PROPERTIES:

STABILITY AND REACTIVITY: 

NORMALLY STABLE (CONDITIONS TO AVOID): Normally stable, Avoid exposure to open flame or temperatures exceeding recommended processing temperatures.
Incompatibilities: Strong oxidizing agents, acids, and bases.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition products may include: caprolactam, carbon monoxide, carbon dioxide, hydrogen Cyanide, and ammonia when exposed to extreme heat.
HAZARDOUS Polymerization: Will not occur.

TOXICOLOGICAL INFORMAITON:

Toxicity data is limited. There has been no evidence  of acute toxicity, Skin Senitization, or sub-acute sub-chronic toxicity as a result of repeated exposure.

OTHER DISPOSAL CONSIDERATIONS:

Dispose of in compliance with Federal, state and local government regulations. Usually considered an inert package material that can be recycled-or land filled.
The information offered here is for the products shipped. Use an/or alterations to the product such as mixing with other materials may significantly change the characteristics of the material and alter the RCRA classification and proper disposal method.

TRANSPORT INFORMATION:
US DOT HAZZARD CLASS: Not regulated
US DOT ID#: Not applicable

REGULATORY INFORMATION:TOXIC SUBSTANCES CONTROL ACT (TSCA)

TSCA INVENTORY STATUS: All components used to produce the above formulations-are listed on the TSCA Inventory.

OTHER TSCA issues: None

SARA TITLE III: In accordance with the provision of Title III, sections 311 & 312 of the Superfund amendmenments and authorization act, these products are not hazardous. These products do not contain Section 313 Reportable Ingredients.

California Prop 65: no reportable substances In Compliance 

CONEG: These products are in compliance with the heavy requirements of the Coalition of Northeastern Govenors

Ozone Depleting Substances: None reportable, in compliance with 40 CFR 82. 

Carcinogenicity Classification (Components present at 0.1% or more): None unless otherwise listed below:

IARC: (International Agency for Research on Cancer) None 

NTP: (National Toxicology Program) None 

European Hazardous Chemicals: None Reportable

DSL (Canadian Domestic Substances List): None Reportable

Other Information: 

For other information, contact Degage Corp. (972) 524 - 2979

Cleanroom Non Corrosive - Class 100 Non Corrosive - Cleanroom LDPE - Cleanroom Packaging - Cleanroom Pink LDPE - Cleanroom ESD - Class 100 Pink LDPE ESD