DC-1360-C Class 100 Poly Moisture Vapor Barrier Bags JPG-5322-1

SAMPLE	WVTR G/M2/DAY	WVTR G/IOO IN2/DAY	TEST CONDITIONS
			TEMP.	RH N2
CLEAR COMPOSALAM BB450 (NYLON/FOIL/POLY)	2.92	0.188	37.8C	90%
CLEAR COMPOSALAM BB450 (NYLON/FOIL/POLY)	2.70	0.174	37.8 C	90%
DEGAGE: GREEN CLEAN "STAY DRY"	2.01	0.130	37.8C	90%
DEGAGE: GREEN CLEAN "STAY DRY"	1.91	0.123	37.8C	90%

MOISTURE VAPOR BARRIER BAG SPECIFICATIONS

(DegageCorp. CleenTuff-Green Stay Dri Class100)

(A LIGHT GREEN TINT or CLEAR, VAPOR BARRIER, MONO FILM, CLASS 100)

PHYSICAL PROPERTIES
MATERIAL		A PROPRIETARY, HOMOGENEOUS BLEND OF CLEAR "CleenTuff," & LOW DENSITY TRANSPARENT POLYETHYLENE RESINS.
AVAILABLE CONFIGURATION		BAGS, Pouches  OR LAY- FLAT TUBING ON ROLLS.
CLARITY		LIGHT GREEN TINT OR CLEAR AS SPECIAL ORDER.
AVAILABLE THICKNESS		.002 TO .008 Mil

FILM PROPERTIES	ASTM METHOD	UNITS	AVERAGE VALUES
TENSILE STRENGTH (BREAK)	D-882	PSI
MD			4,350
TD			4,270
ELONGATION (BREAK)	D-882	%
MD			410
			675
DART DROP IMPACT	0-1709	GRAMS	263
WATER VAPOR TRANS. RATE	ILL.INST.	GRAMS 100 SQ.IN I 24 HR	.126 (AVERAGE)

MATERIAL SAFETY DATA SHEET

DegageCorp . 002 - .008 CleenTuff MVB  Composition/Information on Ingredients

BALAZS ANALYTICAL TESTING SERVICES                                                                   "CleenTuff MVB Test Results"
Analyte	Reporting Limit (ug/Cm2)	Sample 1 LDPE	Sample 2 A/S Poly LDPE
Bromide	0.001	•	•
Chloride	0.002	•	•
Fluoride	0.002	•	•
Nitrate	0.002	•	•
Nitric	0.002	•	•
Phopsphate	0.002	•	•
Sulfate	0.001	•	•
Ammonium	0.0001	0.001	0.032
Potassium	0.007	•	•
Sodium	0.007	•	•

INGREDIENT NAME	CAS#	Weight %
Polycaprolactam (Non-hazardous)	25038-54-4	Proprietary

Trace impurities and additional material names not listed above may also appear in the Regulatory Information section towards the end of the MSDS. These materials may be listed for local "Right to Know" compliance and for other reasons.

HAZARDS IDENTIFICATION:
EMERGENCY OVERVIEW: A clear or colored plastic film. Not considered hazardous under normal usage. Can release irritating and/or toxic vapors if involved in a fire.

POTENTIAL HEALTH HAZARDS:
SKIN: Not considered hazardous.
EYES: Not considered hazardous. May cause mechanical irritation if film comes into contact with the eye.
INHALATION: Not a route of exposure under normal usage. Elevated processing temperatures may release irritating vapors.
INGESTION: NOT a route of exposure. Not considered hazardous.
DELAYED EFFECTS: None known
ENGINEERING CONTROLS: General room ventilation plus local exhaust at points of fume generation to maintain exposure below the PEL/TLV exposure limits.

PERSONAL PROTECTIVE EQUIPMENT:
SKIN PROTECTION: Not normally required. Use heat resistant gloves if handling melted material.
EYE PROTECTION: As a general practice in manufacturing areas, safety glasses that conform to ANSI Z87.1 should' be worn.
RESPIRATORY PROTECTION: Under normal usage, not normally required. A NIOSH/MSHA approved respirator should be worn in areas where the PEL/TLV is exceeded.
ADDITIONAL RECOMMENDATIONS: None

EXPOSURE GUIDELINES:

INGREDIENT NAME	ACGIH TLV	OSHA PEL
		TW A = 20mg/m3   STEL = 40mg/m3

** = Workplace Environmental Exposure Level (AlHA).
*** = Biological Exposure Index (ACGIB).

OTHER EXPOSURE LI~UTS FOR POTENTIAL DECOMPOSITION PRODUCTS: None

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE	Solid
ODOR	None
SPECIFIC GRAVITY (Water = 1.0)	1.05-1.25
SOLUBILITY IN WATER <"Weight %)	Negligible
pH	Not applicable
BOILING POINT	Not applicable
MELTING POINT	220-223°C (428-433°F)
VAPOR PRESSURE	Negligible at room temperature
VAPOR DENSITY (Air = 1.0)	Not determined
EVAPORATION RATE	Not applicable
COMPARED TO	Not applicable
% VOLATILES	Negligible
FLASH POINT	> 400°C

STABILITY AND REACTIVITY:

NORMALLY STABLE (CONDITIONS TO AVOID): Normally stable, Avoid exposure to open flame or temperatures exceeding recommended processing temperatures.
Incompatibilities: Strong oxidizing agents, acids, and bases.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition products may include: caprolactam, carbon monoxide, carbon dioxide, hydrogen Cyanide, and ammonia when exposed to extreme heat.
HAZARDOUS Polymerization: Will not occur.

TOXICOLOGICAL INFORMAITON:

IMMEDIATE (ACUTE) EFFECTS: Not determined.
DELAYED (SUBCHRONIC &CHRONIC) EFFECTS: None known
ECOLIGICAL INFORMATION: Material is considered inert and not expected to be biodegradable or toxic.
DISPOSAL CONSIDERATIONS: Not Applicable
RCRA: Is the unused product a RCRA hazardous waste if discarded?  No
If yes, the RCRA ID number is:

OTHER DISPOSAL CONSIDERATIONS:

Dispose of in compliance with Federal, state and local government regulations. Usually considered an inert package material that can be recycled-or land filled.
The information offered here is for the products shipped. Use and/or alterations to the product such as mixing with other materials may significantly change the characteristics of the material and alter the RCRA classification and proper disposal method.

TRANSPORT INFORMATION:
US DOT HAZZARD CLASS: Not regulated
US DOT ID#: Not applicable

REGULATORY INFORMATION:
TOXIC SUBSTANCES CONTROL ACT (TSCA)

TSCA INVENTORY STATUS: All components used to produce the above formulations-are listed on the TSCA Inventory.

OTHER TSCA issues: None

SARA TITLE IU/CERCLA: "Reportable Quantities"(RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the following ingredients:

INGREDIENT	SARA/CERCLA RQ (lb)	SARA EHS TPO (Ib)
No ingredients listed in this section

Spills resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (1- 800-424-8802) and. to your local emergency planning committee.

SECTION 311 HAZARD CLASS: None

SARA 313 TOXIC CHEMICALS: The following ingredients are SARA 313 "Toxic Chemicals". CAS #'s and weight percent's are found under composition/information on ingredients.

INGREDIENT	COMMENT
No ingredients listed in this section

STATE RIGHT TO KNOW: In addition to the ingredients found in section composition/information on ingredients. The following are listed for state Right-to-know purposes:

INGREDIENT	WT.%	COMMENT
No ingredients listed in this section

Additional Regulatory Information: The base monomers listed on the EINECS Inventory

WHM'S CLASSIFICATION (CANADA): Not a controlled substance. (Considered to be a manufactured article)